Steel Wire Rope Stop Cable Clamp Double Hole

1. Products details :

Steel Wire Rope Cable Stop Cable Clamp Double Hole Steel (3.0 Line Hole)

​

The "double hole" aspect of the steel wire rope stop refers to its design, which typically includes two holes or openings through which the wire rope is threaded. These holes allow the user to create a loop by passing the wire rope through one hole, then looping it around and passing it through the second hole, effectively forming a closed loop. The ends of the wire rope are then secured using a nut or other fastening mechanism.

Prepare the Wire Rope: Make sure the end of the wire rope is cleanly cut and not frayed. If necessary, use wire cutters or appropriate tools to achieve a clean end.

Thread the Rope: Pass the end of the wire rope through one of the holes in the clamp. If you're creating a loop, make sure to leave enough excess rope to form the desired size of the loop.

Create the Loop: If you're creating a loop, bring the end of the wire rope around and insert it through the second hole in the clamp. The loop should be properly sized and snug but not overly tight.

Secure the Clamp: Place the clamp over the two sections of the wire rope (the end and the looped section) and align the holes with the rope inside. Make sure the nuts or fastening mechanisms are positioned on the side of the clamp where the end of the rope exits.

Tighten the Nuts: Use a wrench to tighten the nuts on the fastening mechanism. Ensure that they are securely tightened to prevent any movement or slippage of the wire rope within the clamp.

Inspect the Installation: After securing the clamp, inspect the installation to ensure that the wire rope is properly seated within the clamp and that there are no visible signs of damage or improper fitting.

2. Surface Treatment:

Steel Galvanized

3. Main Products:

4. FAQ: